Leading Water Proofing product Manufacture

Get Started

Water Proofing - DOV® COAT FLEX

Single component highly flexible membrane coating system suited for application over concrete, masonry and heat pressed clay tiles. Cured membrane is highly flexible, tough, durable, weather proof and waterproof. Suited for external applications like terrace, roofs and sunshades. Two top coats should be applied in mutually perpendicular directions.

Waterproof Coat DOV® COAT ELASTOMERIC

Versatile and easy to apply two component waterproofing membrane coating system suited for application over concrete and masonry substrate expansion and contraction. Suited for roofs, Water tanks, sunken areas, concrete basements and sumps.

Water Proofing - DOV® COAT CRYSTALLINE

DOV® Coat Crystallization type waterproofing system. A distinctive chemical formulation that penetrates concrete pores and forms insoluble crystals blocking off water entry. The active chemicals continue to crystallize whenever they come into contact with moisture making this system of waterproofing unique. Suited for waterproofing of concrete basements, sumps, swimming pools, water retaining structures, toilet slabs and roof slabs. The surface to be treated should be saturated with water before application.

Frequently asked questions

  • Apply one coat of Dovcoat Flex (diluted with water @ 500ml per Kg) at the rate of 10-12 m2 per liter.
  • Allow it to dry for 2-3 hours.
  • Apply the first coat of Dovcoat Flex diluted with water @ 250ml per Kg) at the rate of 2 m2 per Kg and allow it to dry before taking up the second coat, the rate of application being the same.
  • Drying time between coats will be 6 to 8 hours.
  • Ensure that the primer and the 2 coats of Dovcoat Flex totally achieve a minimum thickness of 1 mm DFT.
  • Allow the system to air cure for 7 days minimum

Cracks in concrete must be repaired as soon as possible. 

  • Waterproofing: It will solve the water-dripping problem immediately using DOV Crack filler, If the rains have already begun, get the roof waterproofed and later get the proper work done.
  • DOV Crack filler with DOV Flex waterproof coating: I personally suggest you to go for this. It takes less time and is a proper permanent and suitable method. The method includes:
  1. Cleaning of the crack surface and removing any type of oily dirt or contaminants.
  2. Widen the crack just a little to allow the grouting to occur at a faster pace.
  3. Fill the DOV crack filler in the cracked surface (or  DOV  Epoxy Injection) and seal the surfaces immediately to prevent epoxy gel from falling off. If Epoxy grouting cannot be done, you can do the same using DOV Flex with water, ONLY if the crack is shallow and not widening. When the gel dries up properly, paint the roof to give it a proper finish and to protect it from dust and water.

Hope this helps.