Tiling Aids

General Purpose Tile Adhesive For All Normal Tile Fixing Jobs. Ideal For Fixing Tiles Over Marbles, Mosaics And In Bathrooms, Toilets And Water Bodies With Moderate Hydrostatic Pressure.

Get Started

Tiling Aids - DOV® BOND G

General Purpose Tile Adhesive for all normal tile fixing applications like fixing tiles over marbles, mosaics and in bathrooms, toilets and water bodies with moderate pressure conditions.

Tiling Aids - DOV® BOND H

Special Tile Adhesive for fixing of ceramic tiles over marbles, mosaics, below grade structures, swimming pools, sumps etc and fascia of multi- storied structures and areas under high pressure conditions.

Tiling Aids - DOV® GROUT E

Epoxy Tile joint grout for long lasting applications, Shrinkage-free, tough, durable, easy to clean, resistant to a wide range of chemicals, water-resistant and available in pleasing shades. Ideal for tile joint filling in Pharmaceutical plants, food processing industry, wash areas in industries, hospitals, bathrooms and toilets.

Tiling Aids - DOV® BOND W

DOV® BOND W White Tile adhesive translucent tiles like marbles, glass tiles and decorative tiles in swimming pools, water bodies and bathrooms.

Tiling Aids - DOV® GROUT G

General Purpose Cement Tile Joint grout -Non-shrink, easy to clean, reduced water absorption, bonds well to the substrate and available in pleasing shades to match or contrast tile colors. Suited for Exterior and Interior applications.

Tiling Aids - DOV® DURAMIX

DOV® DURAMIX White synthetic polymer emulsion to be mixed with DOVBOND G – cements tile joint grouts. Vastly improves texture, adhesion, flexibility and water resistance.

Frequently asked questions

  • Apply one coat of Dovcoat Flex (diluted with water @ 500ml per Kg) at the rate of 10-12 m2 per liter.
  • Allow it to dry for 2-3 hours.
  • Apply the first coat of Dovcoat Flex diluted with water @ 250ml per Kg) at the rate of 2 m2 per Kg and allow it to dry before taking up the second coat, the rate of application being the same.
  • Drying time between coats will be 6 to 8 hours.
  • Ensure that the primer and the 2 coats of Dovcoat Flex totally achieve a minimum thickness of 1 mm DFT.
  • Allow the system to air cure for 7 days minimum

Cracks in concrete must be repaired as soon as possible. 

  • Waterproofing: It will solve the water-dripping problem immediately using DOV Crack filler, If the rains have already begun, get the roof waterproofed and later get the proper work done.
  • DOV Crack filler with DOV Flex waterproof coating: I personally suggest you to go for this. It takes less time and is a proper permanent and suitable method. The method includes:
  1. Cleaning of the crack surface and removing any type of oily dirt or contaminants.
  2. Widen the crack just a little to allow the grouting to occur at a faster pace.
  3. Fill the DOV crack filler in the cracked surface (or  DOV  Epoxy Injection) and seal the surfaces immediately to prevent epoxy gel from falling off. If Epoxy grouting cannot be done, you can do the same using DOV Flex with water, ONLY if the crack is shallow and not widening. When the gel dries up properly, paint the roof to give it a proper finish and to protect it from dust and water.

Hope this helps.